Butterfly Valves

Silent Feature

Mets manufacturing standard design as per BS 5155/ API 609 / IS 13095 AWWA C-504 /ANSI B 16.34 and inspection testing standard as per API 598/ BS 6755 / MSS - SP -61.
SPLIT body compact design for open/close cycle with very low torque.
2PC SPLIT body with replaceable PTFE seat type valves can be supplied on specified request.
Multipurpose water design.
REPLACEBAL/ Molded rubber seat in various material.
100% tight shut off in both flow directions.
A fully universal body design ensures suitable for mounting between all popular standards (VIZ: - ANSI, BS, DIN, IS, JIS, etc.)
Lower torque requirement because of bearing support to the shaft.
The notch disc & band lever ensures locking of the valves in 8 intermediate positions in addition to close and open position.

Option:

Log type body design available on request.
Flanged end design butterfly available on request.
Valves can be opened by manual gear unit or pneumatic /electrically actuator.
PTFE lining / coating.
Valves can be supply with PTFE lining /coating in corrosive application.
Ring joint facings available in higher classes
Body & disc supply in difference M.O.C such as CI -IS 210 GR. FG- 200, SG IRON GGG 40, ASTM A 216 GR. WCB, ASTM A 351 GR CF8 / ASTM A 351 GR CF8M
Seat supply in difference M.O.C. such as 1) nitrile 2)epdm 3) hypalon 4) silicon 5) viton 6)neoprene 7)
Stellited seating hard facing are provided on requestOffset disc design available in 350 NB above size butterfly valves.
High performance metal to metal contact valves for high temperature application for hot gases.

Material of Construction

P. No	Qty.	Nomenclature	Material
1	1	BODY	CI. IS 210 Gr. FG 200 /WCB /CF8 /CF8M
2	1	DISC	CI. IS 210 Gr. FG 200 /WCB /CF8 /CF8M
3	1	SEAT( REPLACEABLE )	NITRILE /NEOPRENE/ EPDM / HYPALON / VITON/PTFE
4	2	STEM	AISI 410 / AISI 304 / AISI 316
5	2	BEARING BUSH	BRASS / STAINLESS STEEL- PTFE
6	2	BUSH	PTFE/POLY ACETAL / NYLON
7	Req.	TAPER PIN	S.S. 304 / S.S. 316
8	3	‘O’ RINGS	NITRILE/NEOPRENE/ EPDM/VITON
9	Req.	BODY CLAMP. CAP SCREWS	CARBON STEEL / S.S. 304
10	2	BOILS & NUTS	CARBON STEEL
11	1	NOTCH DISC	CARBON STEEL
12	1	LEVER	CARBON STEEL- FABRICATED

Technical Specification

Manufacturing	BS 5155 / API 609 / IS 13095
Face to Face (WAFER SHORT)	BS 5155 / API 609 (CATEGORY A ) / IS 13095
End Connection	WAFER TO SUIT ANSI B16.5 150# / DIN 2542 (PN-10) DIN 2543 (PN-16) / Bs10 TABLE E
Inspection & Testing Std	BS 5155 / BS 6755 (part-1) / API 598 / IS 13095

Alternatively device of the disc to shaft connection can be provided at our option.
The valve can be supplied with matching pneumatic or electrically operated actuator for remote / automated control and operation.
The design and technical data furnished here are subject to change due to continuous product development.

C/F:-

Neck flange according to ISO -5211 hand lever can be locked through pad lock.
Excellent flow control in quarter turn operation.
Body & stem to tally protected from service fluid.
Centrally mounted disc, shafts and bearings, therefore valves give higher cv valves.
Face to face water short dimensions conform to BS 5155 / API 609 / IS 13095 / AWWA C 504.
Uniflow direction installation.
Pressure rating PN 10 / PN 16
Testing body : 1.5 * PN
Seat : 1.1 * PN
Temp range: - 20'c to 180 'c (depending on MOC)

Application

Selection Gland Packing Material